Valve cleaning, scaling and descaling and valve care

Valve cleaning, scaling and descaling and valve care

Valves are an important part of home sanitation tools. Kitchens, bathrooms, toilets, etc. all require taps to use water to direct clean flow to the environment.

But the same beautiful and stylish tools after purchase, need care and maintenance. Cleaning toilet and dishwasher faucets is not a difficult task, and if it is done properly, it will need less cleaning each time. You can easily turn on your home’s taps like the first day with a few home tricks.

Taps are an important part of home decoration and the shine and luster of faucets is a sign of cleanliness and cleanliness of the house.

Maintenance and cleaning of valves

The following points should be considered when cleaning and electrifying the valves:

Small white stains on the faucet destroy gloss and clarity and make the person feel bad when using the faucets. The reason for these stains is the deposition of minerals and salts in the water on the surface of the valve or their lower pipes. First of all, we emphasize that you should not use acidic and chemical cleaners such as salt ink, Vitex and dishwashing wires in any way, because it will destroy the nickel coating and plating of the valves and will take the valves out of warranty.

1. The best way to wash valves is to use a soap and water solution that preserves their natural color and makes them shiny. It is better to use soft and spongy scoops so that no line is created on them. To get the best results from soap and water solution, it is better to reach them before the sediments surround the body of your valves! We recommend using a solution of soap, water and a soft sponge to wash the valves weekly, then dry them with a towel or soft cloth so that they do not settle again through the remaining water droplets. This will increase the useful life of your valves and you will need to replace them less.

2. Even pure water is able to clean the valves if this washing is continuous and daily, but still if you use a simple antibacterial detergent, you will feel more comfortable.

Clean deposits from valves
3. White vinegar is one of the natural ingredients that you can use to clean your taps. Many experienced people consider vinegar and water solution to be the best cleaning and polishing for taps. To remove scale, first soak a paper towel in vinegar. Wrap a paper towel around the stains and wait for 10 minutes, then easily remove the stains with a dry paper towel. Just note that the use of vinegar due to its acidic nature can cause discoloration of colored water taps and brass taps. So it is better to use this method for sedimentation of steel or chrome valves. You can use vinegar as a strong polisher to remove deposits on taps.

4. To remove scale from the shower geyser, just remove it and soak it in a solution of 50% white vinegar for 30 minutes. With this method, the shower holes will be emptied of sediments and its blockages will be removed.

Do not use salt ink or strong detergents to wash valves
If you use salt ink to clean your bathroom, be sure to cover the milk with plastic before pouring the salt ink, do not close the lid and wash the environment quickly, because the vapors from the salt ink will destroy the color of the valves and Reduces their useful life.

 

Sometimes, by observing all the principles of hygiene and care, the valves break down and their efficiency ends before the end of the expected normal life, and the consumer is forced to change his valves earlier. This is because reputable brands and products have not been used. Miscellaneous products have used a higher percentage of impurities in their trunks and handles and their plating has not been done completely and validly. We recommend that when buying valves, be sure to pay attention to the factory’s reputation and warranty and after-sales service.

750 482 Rassan

Leave a Reply

four × 3 =

جستجو...